FENIX baterka TK20R UE šedá TK20RUEGRY

The Fenix TK20R UE tactical rechargeable flashlight offers a luminous flux of up to 2800 lumens (ANSI). It is equipped with a high-performance Luminus SFT-70 LED, which, in combination with a smooth reflector, creates a well-focused light beam with an extraordinary throw of 465 meters. Included in the package is a 5000 mAh 21700 Li-ion battery, which charges via a USB-C port directly in the flashlight. The charging port is covered by a screw cap, providing excellent protection against water and dirt. The tail end of the flashlight features a tactical switch and a rotary FlexiSensa control selector, allowing the flashlight to be locked or switched between two modes of use. In tactical mode, the flashlight can be turned on in the 2800-lumen mode or strobe mode with variable frequency. In duty mode, you can choose between four lighting modes with a runtime of up to 40 hours. This tactical flashlight is robust yet compact, making it suitable for use on long firearms, ideal for professionals, law enforcement, and hunting.

All parameters of the police flashlight (luminous flux, battery runtime, waterproofing, throw distance, and impact resistance) are measured according to the ANSI/NEMA FL 1-2009 standard.

Specifications of the Fenix TK20R UE Tactical Light:

High-performance Luminus SFT-70 LED with a lifespan of 50,000 hours.
Two lighting modes:Tactical Mode: 2800 lumens (3 hours) -> Strobe 2800 lumens.
Duty Mode: 2800 lumens (3 hours) -> 1000 lumens (3.25 hours) -> 350 lumens (9 hours) -> 30 lumens (40 hours).
Parabolic aluminum reflector for a perfect light beam with a throw of up to 465 meters (53880 cd).
Powered by one rechargeable high-capacity 21700 Li-ion battery with a capacity of 5000 mAh, included in the package.
Charging via a sealed USB-C connector with battery charge status indication.
Electronics with digital constant power regulation and overheat protection.
Memory function that remembers the last used setting (including strobe in tactical mode).
Dimensions: 15.37 cm (length) x 3.4 cm (head diameter) x 2.54 cm (body diameter).
Weight: 207 grams, including the battery.
Body made of durable aircraft-grade aluminum, with a strike bezel on the head.
Battery protected by springs on both ends to handle recoil when used on firearms.
Impact-resistant from drops up to 1 meter.
High-wear-resistant trapezoidal threads.
Hard-to-scratch surface - Type III hard anodized finish.
Waterproof and dustproof according to the IP68 standard (tested underwater at a depth of 2 meters for 4 hours).
Hardened ultra-clear glass lens with anti-reflective coating.
Tactical FlexiSensa control switch at the end of the flashlight for mode switching and locking.
Removable sturdy clip for secure and easy carrying.
Package includes: wrist strap, belt holster, spare O-ring, USB-C charging cable, Fenix ARB-L21-5000 V2.0 battery.

Optional Accessories: Cable switch AER-05, traffic cone AOT-M, red filter AOF-M, diffuser AOD-M.

Compatible with quick-release weapon mount ALG-15, quick-release rail mount ALG-00, M-LOK mount Fenix ALG-16, barrel mount Fenix ALG-18, metal magnetic barrel mount, plastic magnetic barrel mount, flashlight mount for optics, metal optics mount, Fenix ALD-05 strap for helmet use, bike mount FB-1, and Fenix bike mount.

Additional accessories available: USB power adapter and car USB adapter.

Using the Fenix TK20R UE Flashlight:

From the factory, there might be an insulation cover on the battery inside the flashlight. Remove it before the first use.

To turn on the flashlight, press the tactical button at the end of the flashlight, and hold the button for momentary activation. The FlexiSensa control rotary switch at the end of the flashlight allows you to choose between tactical mode, duty mode, and locking the flashlight.

Duty Mode: The flashlight turns on in the last selected brightness level. Four brightness levels can be cycled through by pressing the button.

Tactical Mode: The flashlight turns on in the last selected brightness level, offering a strobe mode and a maximum output of 2800 lumens. Switch between modes by pressing the button.

Lock Mode: The third position on the rotary selector locks the flashlight, preventing it from turning on - useful during transportation. The flashlight can be locked in either the on or off state, and locking it will also turn it off. Unlocking it will turn it on in the last used mode.

Intelligent Overheat Protection: Given the high output of 2800 lumens, the flashlight can heat up. If the temperature exceeds 60°C, the flashlight will automatically reduce the brightness. Once the temperature drops below 60°C, higher brightness levels can be used again.

Battery Charge Indicator: For tactical reasons, the charge indicator is hidden under the protective cap of the charging port. To check it, unscrew the cap. The flashlight indicates battery status for three seconds after turning on. Green indicates a sufficient charge (100% - 85%), flashing green (85% - 50%), steady red (50% - 25%), and flashing red indicates a critically low battery (25% - 1%). If the battery is low, the flashlight will gradually switch to lower brightness levels and, in the lowest mode, will flash three times every five minutes.

Charging the Flashlight: Unscrew the protective cap below the head of the flashlight and use the included USB-C cable to connect it to a computer, wall USB adapter, or car USB adapter (not included). You can also use any phone charger with a USB-C connector. The indicator LED opposite the charging port lights up red during charging and turns green when fully charged. Charging a fully depleted battery takes about 3.5 hours. The used Li-ion battery does not suffer from memory effect, so the flashlight can be recharged at any time. The flashlight cannot be turned on while charging.

Warnings:

Use only high-quality 21700 Li-ion batteries to avoid damaging the flashlight, such as from battery leakage.
Insert the batteries with the positive pole towards the head of the flashlight.
If the protective rubber rings appear damaged after long-term use, replace them. Also, lubricate the rings to prevent rubber erosion. Following these guidelines ensures the flashlight remains water-resistant.
If the flashlight flickers, does not switch to higher brightness levels, or does not turn on, it may be due to one of the following reasons:
The battery is nearly depleted – recharge it.
The contacts inside the flashlight are dirty – clean them with a cotton swab dipped in alcohol.
The tail end of the flashlight is loose – tighten it.