Fenix ​​BC05R

Red light Fenix BC05R V2.0 brings two levels of brightness - 5 and 15 lumens and three lighting modes - fast/slow flashing and constant lighting. The flashlight has a built-in 400mAh lithium polymer battery, which is charged through the USB-C connector directly in the flashlight. The light source consists of five red LEDs. In fast flashing mode with 5 lumens of brightness, the flashlight lasts up to 120 hours. The effective warning distance of the light is 50 meters, but it is visible from a distance of up to 230 meters. The package also includes a clip, which allows the flashlight to be attached to a backpack, clothing or headlamp strap. It can therefore be used not only as a rear bike light, but also for running and hiking.

The holder allows quick mounting and dismounting of the bike light without using tools. The clamp fits on a seatpost with a diameter of 20 to 35 millimeters.

All parameters of the flashlight (luminous flux, battery life, waterproofness, and beam distance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Usage:

To turn the flashlight on/off, hold the button on the flashlight pressed for about 0.5 seconds. You can switch between brightness modes anytime during operation by briefly pressing the button (the modes cycle in the following order: constant light 5 lm - slow flashing 5 lm - fast flashing 5 lm - constant light 15 lm - slow flashing 15 lm - fast flashing 15 lm).

Battery capacity indicator - with the flashlight turned off, press the button once quickly, and the button backlight will illuminate for five seconds. Continuous green light indicates a charged battery of more than 85%, green flashing indicates a charge of approximately 50 - 85%, continuous red light indicates a charge of approximately 25 - 50%, and red flashing indicates a nearly depleted battery (less than 25%).

Low battery warning - if the battery capacity drops below 25%, the flashlight will automatically switch to lower brightness modes to ensure the longest possible runtime (it is not possible to switch the flashlight to higher modes) and the button will start flashing red. In such case, we recommend charging the flashlight as soon as possible to avoid deep discharging the battery.

Charging:

Open the rubber cover of the USB-C connector on the back of the flashlight and connect it to a computer, power bank, USB wall adapter, or USB car adapter using the supplied cable. Charging can also be done with any USB-C charger if necessary. The button will light up red during charging and green when fully charged. The charging time is approximately 1.5 hours. The Li-poly battery used does not suffer from memory effect, so the flashlight can be charged anytime. After charging and disconnecting the power cable, do not forget to seal the USB connector cover.

Caution:

Do not disassemble sealed parts of the flashlight yourself, as it will void the warranty.
If the flashlight is blinking or not turning on, it means the battery is depleted. Charge it.

Parameters:

• 5 red LEDs with a lifespan of 50000 hours.
• 2 brightness modes: 15 lumens / 5 lumens
• 3 lighting modes: slow flashing / fast flashing 15 lumens / constant lighting
• built-in 400mAh Li-poly battery - charging via USB-C connector
• battery depletion warning, overcharge protection and full discharge protection of the battery.
• battery charge status indication.
• warning distance of 50 meters, visible from a distance of up to 230 meters.
• rubberized holder clamp for secure and stable attachment.
• made of impact-resistant plastic.
• dimensions of the flashlight: 5.1 cm x 2.2 cm x 2.2 cm.
• weight: 28 grams including the battery.
• waterproof and dustproof according to IP66 standard

Package contents: flashlight, mounting strap, clip, USB-C cable.