Fenix ​​E01 V2.0

Second generation of the popular mini flashlight Fenix E01 V2.0 offers three output modes with a light output of up to 100 lumens (ANSI). Thanks to its compact size, it is an ideal representative of the EDC (Every Day Carry) category - it can be carried with you at all times, whether in your pocket, on your keys, or in your wallet. The flashlight is not much larger than a micro-sized AAA battery it is powered by. High quality, durability and water resistance are a matter of course. The ultra-thin collimator creates a wide cone of light with a beam distance of up to 35 meters. With its features, this flashlight is destined to serve as a small reliable companion always at hand. This useful gift will always bring joy.

All flashlight parameters (light output, battery runtime, water resistance, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E01 V2.0 flashlight parameters
It uses a powerful Cree XP-G2 S3 LED with a lifespan of 50,000 hours.
Three output modes:
measured with rechargeable NiMH batteries: 100 lumens (50 minutes) -> 25 lumens (4.5 hours) -> 5 lumens (23 hours).
measured with a disposable alkaline battery: 100 lumens (50 minutes) -> 25 lumens (4.8 hours) -> 5 lumens (25 hours).
It uses only one micro-sized battery (AAA type - alkaline, lithium, or rechargeable NiMH). These batteries are affordable and widely available.
The longest runtime is provided by Energizer L92 lithium micro-sized batteries (suitable for extreme temperature conditions).
Runtimes are measured with a 750mAh NiMH rechargeable battery and an included alkaline disposable battery.
Supported battery voltage: 0.9-1.7V.
Dimensions: 6.65 cm (length) x 1.5 cm (head diameter) x 1.4 cm (body diameter).
Weight: 13 grams (without battery).
Wide beam with a beam distance of 35 meters (304 cd).
Made of aircraft-grade hard-anodized aluminum. Resistant surface - Type III hard anodized.
Impact resistant from a height of 1 meter.
Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters).
Reliable rotary switch.
The package includes a metal keychain ring, a spare O-ring seal, and a micro-sized alkaline battery.
Usage
To turn on the flashlight, point the reflector away from you and rotate the reflector counterclockwise (tighten the head). Rotate it in the opposite direction to turn off the flashlight (loosen the head). To change the brightness intensity, quickly turn off the flashlight from the on state and turn it back on. This will switch the flashlight to the next output level. If you leave the light off for longer than 1.5 seconds, it will return to the lowest brightness mode (5 lumens).

Overheat protection - during prolonged operation on the highest output mode, the flashlight may reduce its output to achieve optimal temperature.

Warning
Do not disassemble the sealed part in the flashlight head, as this will void the warranty.
Use only high-quality micro-sized batteries to prevent damage to the flashlight, such as leakage of battery substances.
Remove the batteries from the flashlight if you will not be using it for an extended period of time or if the battery is depleted.
Insert the battery with the positive end facing toward the flashlight head.
If the protective rubber rings appear damaged after extended use, replace them. The rings should also be lubricated to prevent rubber erosion. By following these rules, the flashlight will be properly protected against water.
If the flashlight flickers or does not turn on, it may be due to one of the following reasons:Batteries are almost depleted - replace them.
The contacts inside the light are dirty - clean them with cotton wool soaked in alcohol.