Fenix E35R V3.0 + AOD-S V2.0

Set of Fenix E35R Flashlight and Fenix AOD-S V2.0 White Diffuser

The rechargeable pocket flashlight Fenix E35R offers a luminous flux of up to 3100 lumens (ANSI) and a beam distance of up to 260 meters. This excellent performance is achieved using the modern Luminus SST-70 LED. It is powered by a high-capacity 21700 Li-ion battery with a capacity of 5000 mAh. Charging is done via a USB-C connector on the side of the flashlight. The E35R replaces the popular E35 V3.0 flashlight but adds a built-in charging connector and a magnetic tail cap. The flashlight is designed with ease of use and wide applicability in mind. Six lighting modes allow you to choose between high performance and battery life of over two and a half days. There is also a blinding strobe for emergency situations. The Fenix E35R is powered by digitally regulated constant current to ensure consistent light output even as the battery voltage decreases. The flashlight is equipped with an ultra-thin collimator made using automotive industry technologies. Activation and mode switching are done via an ergonomically placed side button. The practical magnet in the tail cap allows the flashlight to be attached to iron objects.

This flashlight is an ideal lighting tool with an excellent balance of high performance, quality, and price. It can be recommended for a wide range of outdoor, sports, work, and professional activities.

All flashlight parameters (luminous flux, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Specifications of the Rechargeable Fenix E35R Flashlight:

Uses premium Luminus SST-70 LED with a lifespan of 50,000 hours.
Six performance modes: 3100 lumens (2.5 hours) -> 1000 lumens (3.67 hours) -> 350 lumens (9.3 hours) -> 150 lumens (21.3 hours) -> 30 lumens (69 hours) - Strobe with variable frequency (3100 lumens).
The luminous flux and runtimes are measured with the included 21700 Li-ion battery with a capacity of 5000 mAh.
The flashlight has memory and turns on in the last selected mode (applies only to 30, 150, and 350 lumens modes).
Electronics with digital constant regulation and intelligent overheat protection.
Made of aircraft-grade hardened aluminum T6, the flashlight is impact resistant to falls from a height of 1 meter.
Reverse polarity protection to prevent damage from incorrect battery insertion.
Durable surface - Type III hard anodized.
Battery charge status indicator built into the button.
Waterproof according to the IP68 standard (tested underwater at a depth of 2 meters).
Unique ultra-thin collimator for a perfect light beam with a range of 260 meters (15103 cd).
Dimensions: 12 cm (length) x 2.65 cm (diameter).
Weight: 148 grams with battery.
The flashlight comes with a Fenix ARB-L21-5000 V2.0 battery, USB-C charging cable, wrist strap, and spare O-ring.
Models from the E series are supplied without a holster. This basic holster can be purchased separately.
Optional original accessories available: AOD-S V2.0 diffuser, AOT-S+ red traffic cone, Fenix ALD-05 headlamp strap for helmet use, rotating belt holster, bicycle mount, Fenix bike mount, USB power adapter, and car USB adapter.
The flashlight is also compatible with the LockBlocks bicycle mount and BikeBlock helmet mount.

Usage of the Fenix E35R Work Flashlight:

From the factory, there may be an insulating cover on the battery inside the flashlight. Remove it from the battery before first use.

To turn on or off, hold the side button for about 0.5 seconds; the flashlight will always turn on in the last selected mode except for the two highest (turbo and high). You can switch performance modes at any time during operation by pressing the side button. The strobe can be activated by holding the button for 1.2 seconds (the flashlight must be on). The strobe will turn off when the button is released.

Charging: Open the rubber cover of the charging connector on the side of the flashlight and connect the included USB-C cable, the other end of the cable to a computer, or a USB power adapter for the mains or car. The indicator LED will light up red during charging. Once fully charged, it will light up green. Charging a fully discharged battery takes about 3 hours (with a 2A power source). During charging, you can use the 30, 150, and 350 lumen modes.

Intelligent Overheat Protection: If the temperature exceeds 60°C, the output will automatically reduce. Once the temperature drops below 60°C, the highest output can be used again.

Battery Status Indicator: After a short press of the button (the flashlight must be off), the LED indicator in the button will activate. If the indicator lights green, the battery is more than 85% charged. Green flashing indicates 50-85% capacity. Red light means 25-50% charge. Red flashing indicates less than 25% battery capacity remains.

Button Lock: To prevent accidental activation in luggage, quickly press the button twice within 0.5 seconds (the flashlight must be off), the flashlight will blink twice in low mode and cannot be turned on. To unlock, repeat the quick double-press. Accidental activation can also be prevented by loosening the flashlight body.

Low Battery Warning: The side button will start blinking red, and the flashlight will automatically switch to the lowest mode.

Warnings:

Do not disassemble the sealed part in the head of the flashlight; this will void the warranty.
Use only high-quality 21700 Li-ion batteries to avoid damaging the flashlight due to battery leaks.
If the protective rubber rings appear damaged after extended use, replace them. Lubricate the rings regularly to prevent rubber erosion. Following these guidelines will ensure the flashlight remains water-resistant.
If the flashlight blinks, does not switch to higher outputs, or does not turn on, it may be due to:The battery is discharged; charge it.
The contacts inside the flashlight are dirty; clean them with a cotton swab dipped in alcohol.
The flashlight body is loose; tighten it.