FENIX GL06 SIG Sauer P365 (600lm.) GL06365

The Fenix GL06-365 pistol LED light is specifically designed for use on short firearms SIG Sauer P365, P365XL, P365X, P365-180, and P365 SAS, or other firearms with the same parameters of the weapon rail. It offers a maximum light output of 600 ANSI lumens with a range of up to 140 meters. The light is powered by one Li-ion battery Fenix ARB-L16-700UP with an integrated micro USB connector (battery and cable are included in the package). If needed, a single-use lithium CR123A battery can also be used. The simplified control of the light is ambidextrous (for right-handed and left-handed users). Mounting on the weapon rail is easy and does not require tools - the light slides onto the weapon rail and is secured with a lever. The light is suitable for professionals, sports and hobby shooters, as well as airsoft enthusiasts.

All parameters of the light (luminous flux, battery operating time, waterproofness, range, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters:
- Premium LED CREE XPL HI with a lifespan of 50,000 hours is used.
- Lighting modes:
1. With the Fenix ARB-L16-700UP battery: 600 lumens (50 minutes) -> strobe.
2. With a single CR123A battery: 400 lumens (1.5 hours) -> strobe.
- TIR optics create a light cone with a range of 140 meters (4880 cd) - measured when using the supplied battery.
- Protection against reverse battery insertion and protection against over-discharge of the battery.
- It uses one Li-ion battery type Fenix ARB-L16-700UP (included in the package) for power supply, alternatively other Li-ion RCR123A / 16340 batteries can also be used.
- Additionally, a single-use lithium CR123A battery can be used, but the light output with it is reduced to 400 lumens.
- Dimensions: 6.1 cm (length) x 2.8 cm (height) x 2.3 cm (width).
- Weight: 69 grams (including the battery).
- Compatible with weapon rails SIG Sauer P365, P365XL, P365X, P365-180, and P365 SAS.
- Intelligent overheating protection.
- Body of the light made of aerospace-grade aluminum.
- Resilient hard anodized surface - Type III hard anodized.
- Impact-resistant from a height of 1 meter.
- Trapezoidal threads highly resistant to wear.
- Waterproof according to IPX7 standard (tested underwater at a depth of 1 meter).
- The package includes the Fenix ARB-L16-700UP battery, a charging micro USB cable, a spare O-ring, and instructions.

Control:
There may be an insulating cover inside the light on the battery. Remove it from the battery before first use.

A single click on any of the switches turns the light on/off.

For momentary activation, press and hold any switch. The light will illuminate while the switch is held, and will turn off when the switch is released.

Strobe activation: Pressing both switches simultaneously activates the strobe. The strobe can also be activated by pressing and holding one switch and clicking the other switch. Pressing one switch again will end the instant strobe mode, or pressing both switches simultaneously will return to the last used output.

Intelligent overheating protection: When the light is used for an extended period, a large amount of heat accumulates. When the light reaches a temperature of 55°C or higher, it automatically reduces the output by a few lumens to lower the temperature. When the temperature drops below 55°C, it returns to the standard output.

Warning:
- Do not disassemble sealed parts in the head of the light yourself, as this will void the warranty and may cause damage.
- Fenix recommends using only high-quality batteries.
- If the light will not be used for an extended period, remove the battery.
- If the light's lens is contaminated with residues after shooting, try cleaning it with fine steel wool or use gun cleaning paste.
- Long-term use may result in wear of the O-ring. To maintain proper water sealing, replace the ring with a new one.
- Since firearm maintenance requires the use of organic solvents, avoid contaminating key parts of the light. This could damage the light and void the warranty.
- Regular cleaning of electrical contacts ensures smooth operation of the light, as contaminated contacts can cause the light to flicker, illuminate intermittently, or not illuminate for the following reasons:
1. The battery is depleted - replace or recharge it.
2. The contacts inside the light are dirty - clean them with a cotton swab soaked in alcohol.