Fenix ​​weapon rechargeable luminaire 1200lm GL19R

Rechargeable tactical LED flashlight Fenix GL19R is specially designed for use on short weapons and in combination with AER-06S remote switch, it can also be used on long weapons. It offers top light performance of 1200 ANSI lumens with a range of up to 210 meters. The flashlight is powered by one Fenix 18350 ARB-L18-1100P Li-ion battery, which is charged via the USB-C connector directly in the flashlight. The simplified operation of the flashlight is two-way (for right-handed and left-handed users). If necessary, the flashlight can be switched to a lower output of 350 lumens or immediately switched to strobe mode. Mounting on a rail is easy and does not require tools - the flashlight slides onto the weapon rail and is secured with a lever. It can be attached to Picatinny MIL-STD-1913 and GLOCK (may not fit slimline category weapons, e.g. Glock 30 model) weapon rails. The flashlight is suitable for professionals, sport shooters, hobby shooters, and airsoft.

All flashlight parameters (luminous flux, battery life, waterproofness, and range) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix GL19R flashlight operation
There may be an insulation cover inside the flashlight on the battery from the factory. Remove it from the battery before first use.

By pressing any of the switches once, the flashlight turns on in the last selected lighting mode. It turns off again by pressing it again.

For momentary on, press and hold any switch. The flashlight will illuminate while holding the switch and turn off when released.

Momentary activation of strobe mode: With the flashlight turned on, press and hold any of the switches. After 0.5 seconds, the strobe mode will activate and continue while holding the switch.

Switching between lighting modes: Turn on the flashlight, press and hold one of the switches, then press the other switch to switch between 1200 and 350 lumen modes.

Flashlight lockout: When the light is off, press and hold both switches for 5 seconds. The LED indicator at the button will then alternate between red and green blinking, indicating the flashlight's locked state. To unlock it, simultaneously press and hold both switches for 1 second. The flashlight will be activated again.

Battery status indication - an LED indicator is located on the side of the flashlight. The flashlight always indicates the battery level three seconds after turning on. Green indicates sufficient charge (100% - 85%), green flashing indicates 85% - 50% capacity, steady red indicates 50% - 25%, and flashing red indicates critically discharged battery (25% - 1%). If the battery is discharged, the flashlight will automatically reduce the output to 50 lumens.

The battery status indication can be turned on/off by three rapid button presses on the same side as the LED indicator, with the last, third press being held. A successful indication shutdown will be signaled by a green-red-green blink. In this state, the charging progress indication remains functional. When the indication is turned on again, the flashlight will immediately announce the current battery status.

Flashlight charging - remove the rubber cover of the charging connector and connect it to a computer, USB network adapter, or USB car adapter (not included in the package) using the provided USB-C cable. If necessary, any mobile phone charger with a USB-C connector can be used for charging. During charging, the LED indicator on the side of the flashlight will weakly blink red, and after full charge, it will light up green. Charging a completely discharged battery takes about 2 hours. The used Li-ion battery does not suffer from memory effect, so the flashlight can be recharged at any time.

Intelligent overheating protection - due to the high output in the 1200 lumens mode, the flashlight heats up. When the internal temperature of the flashlight reaches 60°C, it will automatically reduce its output. Once the temperature of the flashlight drops below 60°C, the output will gradually increase again.

Warning
Use only high-quality rechargeable batteries to avoid damaging the flashlight, for example, due to leakage of substances from the battery.
When using the flashlight on a weapon, observe all safety precautions.
Insert the batteries with the positive (+) pole facing the flashlight's head.
If the flashlight flashes, emits low output, or does not turn on, it may be due to one of the following reasons: The battery is discharged - replace or charge it.
The contacts inside the flashlight are dirty - clean them with an alcohol-soaked cotton swab.

Specifications:
- Premium LED Luminus SFT-40 with a lifespan of 50,000 hours of lighting is used.
- 3 lighting modes: 1200 lumens (1 hour) -> 350 lumens (2 hours) -> 1200 lumens strobe mode.
- TIR optics create a cone of light with a range of 210 meters (11,000 cd).
- Protection against reverse insertion of batteries and protection against complete discharge of the battery.
- Powered by 1x 18350 Fenix ARB-L18-1100P Li-ion battery (included in the package).
- Charging via USB-C connector with battery charge status indication.
- Dimensions 7.7 cm (length) x 3.4 cm (height) x 3.0 cm (width).
- Weight: 100 g (including the battery).
- Compatible with Picatinny MIL-STD-1913 and GLOCK weapon rails.
- The flashlight has memory and always turns on in the last set lighting mode (1200 or 350 lumens).
- Intelligent overheating protection.
- Body made of aerospace-grade hard-anodized aluminum.<