Fenix ​​WH23R 600lm.

The Fenix WH23R is a rechargeable work headlamp that is characterized by high resistance to falls and has a unique construction with two reflectors. It is equipped with a touchless on/off function. The remote reflector creates a slightly focused light beam with a range of up to 84 meters, while the second reflector offers very wide and smooth illumination. Both reflectors have a light output of up to 300 lumens, and in turbo mode, they can be combined for a total output of 600 lumens. On the side of the headlamp, there is a rotating controller that allows selection from four positions: off - remote reflector - wide reflector - turbo mode. In the positions of the wide and remote reflectors, it is possible to switch between three power levels using the button hidden in the rotating controller.

The new Gesture-sensing function allows the light to be turned on and off with a simple wave of the hand at a distance of approximately 10 centimeters in front of the headlamp. This function allows the headlamp to be used without hands coming into contact with mud, oil, or other dirt, keeping the light clean. It is powered by a built-in 2000 mAh Li-poly battery, which can be charged using a modern USB-C connector directly in the headlamp.

All parameters of the light, such as light output, battery runtime, waterproofness, range, and impact resistance, are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters of the Fenix WH23R work headlamp:

It uses two powerful LED Lumileds with a lifespan of up to 50,000 hours.
Light functions:
Turbo combined mode of both reflectors: 600 lumens (3.8 hours).
Remote reflector: 300 lumens (6.3 hours) -> 120 lumens (9.5 hours) -> 30 lumens (35.9 hours).
Wide reflector: 300 lumens (6.3 hours) -> 70 lumens (15.5 hours) -> 5 lumens (150 hours).
It is powered by a built-in lithium-polymer battery with a capacity of 2000 mAh/3.7V.
Charging via USB-C connector on the bottom of the light.
Battery level indication with a four-level indicator.
Range of up to 100 meters when using both reflectors (1772 cd).
Unique touchless on/off function with Gesture-sensing (deactivation possible).
The rotating controller is easy to operate even with gloves.
Dimensions: 8.65 cm (width) x 4.5 cm (depth) x 4.37 cm (height).
Weight: 115 grams (including the battery).
Shock-resistant from a height of 2 meters.
Waterproof according to the IP66 standard.
The package includes the headlamp with a strap and a USB-C charging cable.
Possibility to purchase accessories such as the APB-20 case, USB adapter for the electrical network, and USB adapter for the car.
Controls:
The headlamp is turned on and off using the rotary switch on the right side. In the first position, the headlamp is off, in the second position, the remote reflector is on, in the third position, the wide reflector is on, and in the fourth position, the turbo combined mode is on. In the remote and wide reflector modes, it is possible to cyclically switch between different power levels located in the rotating controller. The headlamp has memory and turns on in the last set power mode.

If the headlamp is flashing, does not switch to higher power modes, or does not turn on, it could be due to one of the following reasons: The battery is almost depleted - it needs to be charged.