Fenix ​​E03R

Fenix E03R V2.0 is the successor of the successful miniature rechargeable flashlight that can be carried on keys or in a purse. Despite its small dimensions and weight of only 30 grams, it offers a high luminous flux of up to 500 lumens (ANSI). The light cone evenly illuminates a wide area up to a distance of 90 meters. It is powered by an integrated 400 mAh Li-poly battery, which is charged via a modern USB-C connector on the side of the flashlight. There are a total of four white light modes and two red light modes with a maximum endurance of up to 30 hours in the lowest mode. A unique feature is the so-called Breathing light, a pulsating light around the power button with a brightness of 1 lumen, which can be used for discreet signaling or identification of the flashlight's location and keychain. The flashlight is supplied with a keychain ring, so you can easily carry it with you at all times. The button also has a practical battery charge indicator. This useful gift will always bring joy.

All flashlight parameters (luminous flux, battery operating time, waterproofness, impact resistance, and range) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Two white LEDs MATCH CA18 and one red LED Everlight 2835 are used. All with a lifespan of 50,000 hours.

Dimensions: 5.3 cm (length) x 2.6 cm (width) x 1.3 cm (height).

Four white light modes: 500 lumens (1.3 hours) -> 150 lumens (2 hours) -> 30 lumens (6.5 hours) -> 5 lumens (30 hours).

Two red light modes: 5 lumens -> red blinking (5 lumens).

The packaging includes a keychain ring and a USB-C charging cable.

It is possible to purchase a USB-C cable, a colored USB-C cable, or a micro-USB to USB-C adapter separately.

Usage:
To turn on or off, hold the side button for about 0.5 seconds. To turn on the red light, hold the button for 1.2 seconds. The performance modes can be switched at any time during operation by pressing the side button. To turn on the Breathing light, turn off the flashlight and quickly press the button twice.

The control button can be locked to prevent accidental turning on, for example, during transport in a bag - to lock, turn off the flashlight and hold the button for 3 seconds. The flashlight will then flash twice, indicating it is locked. To unlock, hold the button for 3 seconds again.

Battery charge indication - when the flashlight is off, briefly press the button, and a small LED in the button will light up for three seconds. Green light indicates a battery charged at 100-85%, green blinking indicates 85-50%, red light indicates a battery charged at 50-25%, and red blinking indicates a battery charged less than 25%.

Overheat protection - if the temperature of the flashlight exceeds 60°C, the performance will automatically be reduced. Once the temperature drops below 60°C, the highest performance can be used again.

Low battery warning - the flashlight gradually switches to the lowest performance mode, and the indicator LED in the power button starts blinking red.

Charging:
Open the rubber cover of the USB-C connector and connect the flashlight to a computer, a USB wall adapter, or a car USB adapter with a USB-C cable. It is also possible to use any mobile phone charger with a USB-C connector for charging if necessary.

During charging, the indicator LED in the button will illuminate red, and after full charge, it will illuminate green.

The charging time for a fully depleted battery is approximately 2 hours.

The Li-poly battery used does not suffer from memory effect, so the flashlight can be charged at any time.

Thoroughly seal the USB connector cover after each charging.