Fenix ​​Work Light and Power Bank (2000lm.) CL28R

Fenix CL28R is a multifunctional rechargeable lantern with an integrated power bank. It serves as a rechargeable work light, light for photographers, as well as a light for household, camping or car use. The highly bright COB LED provides a light output of up to 2000 lumens (ANSI), with adjustable intensity using a rotary controller. The light temperature can also be smoothly adjusted within the range of 2700 - 6000 K. The CL28R is powered by a built-in 10000 mAh Li-ion battery, which can be charged directly in the lantern via a USB-C connector. It also has two charge-out USB-C and USB-A ports, so the light can be used as a power bank supporting fast charging protocols such as PD3.0/PD2.0, QC3.0/QC2.0 with 18W power. In addition to the continuously adjustable white light, the light also offers two red light modes - constant output of 9 lumens and a flashing mode with the same 9 lumens output.

Thanks to its durable and impact-resistant construction with an IP66 rating, the light can withstand adverse weather conditions and falls from a height of 1.5 meters. The light can be secured in various positions using the 360° rotatable handle, built-in magnets, and a tripod thread.

All parameters of the light (light output, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Performance modes:
- adjustable white light output: 2000 - 10 lumens (with a runtime of 9 - 360 hours).
- red light: 9 lumens (170 hours) -> flashing 9 lumens (340 hours).

Dimensions: 10 cm x 9.7 cm x 4.1 cm.

The package includes the light and a charging USB cable.

Usage:
To turn on the white light mode, rotate the A controller clockwise. This allows you to smoothly adjust the light output from the lowest to the highest setting. To decrease the output, rotate the A controller counterclockwise. To turn off the white light, rotate the A controller counterclockwise until it clicks into the off position.

To change the light temperature while the lantern is on, rotate the B controller clockwise. The shade of the light will change from warmest to coolest. Rotate in the opposite direction to change it back.

To turn on the red light mode, press and hold the orange button when the light is off. Short presses of the orange button switch between steady red light and flashing mode. Press and hold the button again to turn off the red light. The red light mode cannot be activated while the white light is on, so it is necessary to turn off the white light first by rotating the A controller clockwise. To switch back to the white light mode from the red light mode, simply turn on the white light by rotating the A controller clockwise.

Battery capacity indication - when the lantern is off, press the orange button briefly to activate four indicator LEDs on the front of the lantern. The number of lit LEDs indicates the approximate battery charge level (20-40%, 40-60%, 60-80%, over 80%). When the battery capacity drops below 20%, the last indicator LED starts flashing.

Charging:
To charge the light, open the rubber cover of the USB connectors. Connect the USB cable to a computer, a USB wall adapter, or a car USB adapter. You can also use a standard USB-C connector mobile phone charger for charging. While charging, the indicator LEDs flash from left to right, and when fully charged, all LEDs remain on steady. After charging, make sure the rubber cover of the connectors is securely closed to prevent dirt from entering.

The battery does not suffer from memory effect, so it can be recharged at any time, and it is not necessary to wait until it is completely discharged. Charging the fully depleted lantern takes about 4 hours (depending on the strength of the charging source used).

The light can be used while it is charging.

To power external USB devices (power bank function), connect the cable to either the USB-C or USB-A connector (both cannot be used at the same time). The indicator LEDs will blink from right to left. When the battery voltage drops too low (below 2.9V), the power bank function will stop. The light can still be used while charging other devices.